Fuel Injection Keeps Getting Better for Bristol Motorists
Posted October 29, 2013 12:00 PMBristol residents know that engines burn fuel to operate. Fuel is pumped from your fuel tank to your engine where it is squirted—or injected—into your engine's cylinders. This is the function of the fuel injectors.
There are two ways to inject fuel into an engine. Fuel needs air to burn, so in the first method, fuel is injected into a port and allowed to mix with air—and before it is drawn into the cylinders. In the second method, fuel is injected directly into the cylinders and mixes with air after it enters the engine.
Direct injection engines burn fuel more efficiently than conventional engines. Some models can deliver the power of a V8 with the economy of a V6.
For example, in one family of engines, the conventional version (a V6) delivers about 250 horsepower. The direct injection version delivers over 300 horsepower and gets about the same . The turbocharged version delivers 350 horsepower.
Why the big difference in power? Direct injection systems allow fuel to be squirted into the engine at hundreds of times the pressure of a conventional engine. This atomizes the fuel better (breaks it down into tinier droplets), which means more of it gets burned, which translates to more power for your engine. It also results in cleaner emissions and improved fuel economy.
Fuel injectors are precision instruments. They have to deliver the right amount of fuel at exactly the time the engine needs it. They are also engineered to inject fuel with a specific spray pattern. This spray pattern allows for maximum fuel efficiency and proper atomization.
Direct injection engines require a much higher degree of precision than conventional engines. For this reason, they are equipped with more sophisticated computers.
When fuel injectors get dirty, their precision drops off. The spray pattern won't be precise, and the timing of fuel delivery may be off. This decreases fuel efficiency and fuel economy for Bristol drivers as well as delivering less power to the engine.
Fuel injectors are not cheap to replace. Direct injection fuel injectors are even more expensive. And we're talking a mortgage payment to buy a set of new fuel injectors for a diesel engine.
So keeping your fuel injectors clean is just good auto advice for Bristol residents. The best way to do this is to change your air and fuel filters regularly and practice other habits of good vehicle care and preventive maintenance at Economy Transmission and Auto Repair in Bristol. Cleaning additives in your fuel can also help.
If you do end up with gum or varnish in your fuel system, you'll need a professional fuel system cleaning. This will clean out your whole system, including the injectors. The good news is that with proper maintenance, your fuel injectors will last for a long time.
Economy Transmission and Auto Repair
201 Terryville Road
Bristol, Connecticut 06010
(860) 589-1255
Fuel System Cleaning at Economy Transmission and Auto Repair in Bristol for Better Performance
Posted October 24, 2013 12:00 PMA fuel injector is a valve that delivers fuel to a vehicle's engine. It has to deliver the precise amount of fuel to precisely the right place, precisely when the engine needs it. The fuel also has to be mixed with air before it can burn in the engine.
Fuel injectors are engineered to spray fuel in a specific pattern into the engine. (The pattern varies by engine type and design.) In order to achieve these spray patterns, the fuel must be pressurized.
The pressure in a fuel injection system varies depending on its type. Many gasoline engines use port injection systems, which operate with a pressure of 60 pounds per square inch. Newer direct injection systems operate at 10 to 30 times that pressure. Some diesel passenger vehicles have fuel injectors that operate at 30,000 pounds or more per square inch.
Vehicles have one fuel injector for each cylinder in the engine. Your vehicle's control computer constantly monitors the engine and various sensors in the vehicle. It also adjusts the fuel injectors accordingly so that they can deliver the proper amount of fuel to the engine. As you can see, fuel injectors are a sophisticated and vital part of your vehicle's engine.
Because fuel injectors are such precision instruments, dirt and contaminants are a serious detriment to their performance. When an injector gets gummed up, it affects the pressure, pattern and timing of the fuel delivery. The result is a decrease in fuel economy and loss of engine performance.
So it's important to keep your fuel injectors clean. That starts with keeping the fuel in your tank clean. High-quality fuel contains detergents and additives that help clean your engine. Brand-name Connecticut fuel companies also deliver a more consistent quality of fuel than do bargain stations in the Bristol area.
The second way to keep your injectors clean is to keep your fuel filter clean. This filter screens dirt and rust out of the fuel as it travels from the tank to the engine. If the filter clogs up, fuel will bypass it and carry its load of dirt into the engine.
Check your owner's manual or ask the pros at Economy Transmission and Auto Repair in Bristol to find out how often you should change your fuel filter. This should be part of your regular preventive maintenance. Also, remember that if you use bargain-brand or low-grade fuels, or if you drive an older vehicle, your filter will need to be changed more often.
You can also purchase cleaners that will protect your fuel injectors. These cleaners are added to the fuel tank. They work best at preventing build-up in your fuel injectors and can clean up small amounts of carbon, gum and varnish. But they won't be able to clean a fully gummed-up injector. Read the labels before using any of these products for full directions on their use.
If your fuel injectors are gummed up, you can get a professional deep cleaning service at Economy Transmission and Auto Repair in Bristol that will result in better fuel economy and improved vehicle performance.
Good vehicle care will prevent serious damage to your fuel injector system. And this is one system that you want to keep in perfect condition.
Economy Transmission and Auto Repair
201 Terryville Road
Bristol, Connecticut 06010
(860) 589-1255
Fuel Injection: It Keeps Getting Better for Bristol Drivers
Posted October 17, 2013 12:00 PM
Bristol residents know that engines need to burn fuel to operate. Fuel is pumped from your fuel tank to your vehicle engine where it is squirted—or injected—into your engine's cylinders. This is the function of the fuel injectors.
There are two ways to inject fuel into an engine. Fuel needs air to burn, so in the first method, fuel is injected into a port and allowed to mix with air—before it is drawn into the cylinders. In the second method, fuel is injected directly into the cylinders and mixes with air after it enters the vehicle engine.
Direct injection engines burn fuel more efficiently than conventional vehicle engines. Some models can deliver the power of a V8 with the economy of a V6.
For example, in one family of engines, the conventional version (a V6) delivers about 250 horsepower. The direct injection version delivers over 300 horsepower and gets about the same gas mileage. The turbocharged version delivers 350 horsepower.
Why the big difference in power? Direct injection systems allow fuel to be squirted into the vehicle engine at hundreds of times the pressure of a conventional engine. This atomizes the fuel better (breaks it down into tinier droplets), which means more of it gets burned, which translates to more power for your engine. It also results in cleaner emissions.
Fuel injectors are precision instruments. They have to deliver the right amount of fuel at exactly the time the vehicle engine needs it. They are also engineered to inject fuel with a specific spray pattern. This spray pattern allows for maximum fuel efficiency and proper atomization. Direct injection engines require a much higher degree of precision than conventional engines. For this reason, they are equipped with more sophisticated computers.
When fuel injectors get dirty, their precision drops off. The spray pattern won't be precise, and the timing of fuel delivery may be off. This decreases fuel efficiency and fuel economy as well as delivering less power to the engine.
Bristol residents should understand that fuel injectors are not cheap to replace. Direct injection fuel injectors are even more . And we're talking a mortgage payment to buy a set of new fuel injectors for a diesel engine.
So keeping your fuel injectors clean is just good auto advice. The best way to do this is to change your air and fuel filters regularly and practice other habits of good vehicle care and preventive maintenance. Cleaning additives in your fuel can also help.
If you do end up with gum or varnish in your fuel system, you'll need a professional fuel system cleaning. This will clean out your whole system, including the injectors. The good news is that with proper maintenance, Bristol drivers will enjoy better fuel economy and their fuel injectors will last for a long time.
Contact us for more tips to help you improve your performance and safety.
Economy Transmission and Auto Repair
201 Terryville Road
Bristol, Connecticut 06010
(860) 589-1255
Fuel System Cleaning at Economy Transmission and Auto Repair for Better Performance
Posted October 10, 2013 12:00 PM
Hi Bristol residents. Let's talk fuel injectors. A fuel injector is a valve that delivers fuel to a vehicle's engine. It has to deliver the precise amount of fuel to precisely the right place, precisely when the engine needs it. The fuel also has to be mixed with air before it can burn in the engine.
Fuel injectors are engineered to spray fuel in a specific pattern into the engine. (The pattern varies by engine type and design.) In order to achieve these spray patterns, the fuel must be pressurized.
Vehicles have one fuel injector for each cylinder in the engine. Your vehicle's control computer constantly monitors the engine and various sensors in the vehicle. It also adjusts the fuel injectors accordingly so that they can deliver the proper amount of fuel to the engine. As you can see, fuel injectors are a sophisticated and vital part of your vehicle's engine. Because fuel injectors are such precision instruments, dirt and contaminants are a serious detriment to their performance. When an injector gets gummed up, it affects the pressure, pattern and timing of the fuel delivery. The result is a decrease in fuel efficiency and loss of engine performance for Bristol residents.
So it's to Bristol residents' advantage to keep their fuel injectors clean. That starts with keeping the fuel in your tank clean. High-quality fuel contains detergents and additives that help clean your engine. Brand-name fuel companies also deliver a more consistent quality of fuel to Bristol vehicles than do bargain Bristol area service stations.
The second way to keep your injectors clean is to keep your fuel filter clean. This filter screens dirt and rust out of the fuel as it travels from the tank to the engine. If the filter clogs up, fuel will bypass it and carry its load of dirt into the engine.
Bristol residents should check their owner's manual to find out how often they should change their fuel filter. This should be part of your regular preventive maintenance. Also, remember that if you use bargain-brand or low-grade fuels, or if you drive an older vehicle, your filter will need to be changed more often.
You can also purchase cleaners at Economy Transmission and Auto Repair that will protect your fuel injectors. These cleaners are added to the fuel tank. They work best at preventing build-up in your fuel injectors and can clean up small amounts of carbon, gum and varnish. But they won't be able to clean a fully gummed-up injector. Read the labels before using any of these products for full directions on their use. If your fuel injectors are gummed up, you can get a professional deep cleaning service at Economy Transmission and Auto Repair in Bristol that will result in better fuel economy and improved vehicle performance.
Good vehicle care will prevent serious damage to your fuel injector system. And this is one system that you want to keep in perfect condition.
Economy Transmission and Auto Repair
201 Terryville Road
Bristol, Connecticut 06010
(860) 589-1255
Clean Fuel ? Clean Performance for Bristol Drivers
Posted October 2, 2013 12:00 PM
Fuel filters clean the dirt, dust and debris out of your fuel. Both gasoline and diesel-powered engines have them. The fuel filter is located in the fuel line between the fuel tank and the vehicle engine.
Bristol auto owners don't need to filter their fuel because it has lots of grit in it; they need to filter it because it has some grit it in. Any dirt is bad for your engine. The cleaner the fuel, the better your vehicle engine will run.
Over time, the small amounts of rust, dirt and contaminants in your fuel settle out inside the fuel tank. After about five years, this can amount to a quite a bit of sediment. This means that as your vehicle ages, your fuel filter has to work harder to screen your fuel: more sediment in your tank means more potential for grit in your fuel.
The harder your fuel filter works, the more often it needs to be replaced. Check with your owner's manual to find out how often it should be serviced and how long you can expect it to last. Bristol drivers should change it before it becomes clogged. Your friendly and knowledgeable Economy Transmission and Auto Repair service advisor can help you with recommended fuel filter replacement schedules.
Good vehicle care means following recommended schedules for preventive maintenance, including changing your fuel filters. Take the auto advice offered in every owner's manual and have your vehicle regularly inspected at Economy Transmission and Auto Repair. It may save Bristol auto owners money by preventing costly repairs, but it will also repay them in improved safety and peace of mind.
Economy Transmission and Auto Repair
201 Terryville Road
Bristol, Connecticut 06010
(860) 589-1255